Prodaid manufactures feeding system for Spring Feeding

ProdAid Engineers, the 40 years old vibratory bowl feeder manufacturer from Bangalore recently completed an order for feeding system for feeding of springs having dia 12 to dia 18 mm having length 40 mm to 65 mm length. The total system consisted of a vibratory bowl feeder and linear vibrator ahead of the bowl feeder. Thereafter there was a pneumatic singulator to singulate and push side ways one spring each for further operation. These system was mounted on a single table frame. There was also an extra capacity hopper for bulk storage and feeding of the springs. It was mounted on a separate stand with a linear vibrator having an on / off mechanism. The total system consisted of complete electrical and electronic controls. A total of two similar systems were ordered by the customer and Prodaid completed both of them together with inputs and support from its partner, Elscint Automation.

Prodaid manufactures 4 outlet bowl feeder for small metal part

Prodaid Engineers, the 40 years old vibratory bowl feeder manufacturer from Bangalore recently manufactured a bowl feeder with four outlets for feeding of a small metal part. The dimensions of the metal part were such that it was very difficult to orient and feed. The speed required was just 4 parts per minute per outlet and Prodaid achieved a speed of 20 parts per minute per outlet. A linear vibrator was provided at the end of the bowl feeder to make it convenient for the customer to pick up the parts. A centre distance of 50 mm was required to be maintained between each of the parts. The complete assembly was fixed on a single base plate to ensure ease of integration by the customer.

Prodaid supplies Vibratory bowl feeder for feeding Bush

Prodaid Engineers, the 40 years old vibratory bowl feeder manufacturer from Bangalore recently completed an order for a SPM manufacturer for supplying a vibratory bowl feeder for feeding of Bushes. The bushes were unique in the since that the diameter and the height were the same and hence, orientation was difficult. However, Prodaid provided a unique reverse track mechanism to ensure that only the correctly oriented Bushes were feed forward. This not only resulted in the wrongly oriented bushes being recirculated in the bowl but also the speed was improved upon. As against the required speed of 30 parts per minute, a speed of more than 100 bushes per minute was observed. Prodaid also provided for an overflow mechanism so that in case the outlet is stopped, the excess bushes fell back into the bowl. This eliminated the need for a separate sensor for the customer. The bowl was made in stainless steel and PU painted from inside to ensure a very good finish. Model PA-55 was used with a dia 500 mm bowl for this application.