Prodaid manufactures feeding system for Spring Feeding

ProdAid Engineers, the 40 years old vibratory bowl feeder manufacturer from Bangalore recently completed an order for feeding system for feeding of springs having dia 12 to dia 18 mm having length 40 mm to 65 mm length. The total system consisted of a vibratory bowl feeder and linear vibrator ahead of the bowl feeder. Thereafter there was a pneumatic singulator to singulate and push side ways one spring each for further operation. These system was mounted on a single table frame. There was also an extra capacity hopper for bulk storage and feeding of the springs. It was mounted on a separate stand with a linear vibrator having an on / off mechanism. The total system consisted of complete electrical and electronic controls. A total of two similar systems were ordered by the customer and Prodaid completed both of them together with inputs and support from its partner, Elscint Automation.

Prodaid Supplies Bowl Feeder for Sheet Metal Part

Prodaid Engineers, the 40 years old vibratory bowl feeder manufacturer from Bangalore recently completed an order for feeding of a sheet metal part with a nut welded to the same. The speed required was 20 parts per minute. However, the achieved speed or feed rate was 40 parts per minute. The part was having a M6 Nut welded to it and was 30 mm in length x 15 mm in width. The requirement was to get the part in widthwise manner with the nut being at the top. The requirement of the customer was to feed the part width wise into a vertical chute of the chute. Along with the bowl feeder, Prodaid supplied a single post stand with height adjustment and also a linear vibrator with a horizontal chute which was made vertical at the end to match the vertical chute of the customer.