Prodaid manufactures feeding system for Spring Feeding

ProdAid Engineers, the 40 years old vibratory bowl feeder manufacturer from Bangalore recently completed an order for feeding system for feeding of springs having dia 12 to dia 18 mm having length 40 mm to 65 mm length. The total system consisted of a vibratory bowl feeder and linear vibrator ahead of the bowl feeder. Thereafter there was a pneumatic singulator to singulate and push side ways one spring each for further operation. These system was mounted on a single table frame. There was also an extra capacity hopper for bulk storage and feeding of the springs. It was mounted on a separate stand with a linear vibrator having an on / off mechanism. The total system consisted of complete electrical and electronic controls. A total of two similar systems were ordered by the customer and Prodaid completed both of them together with inputs and support from its partner, Elscint Automation.

Prodaid supplies Vibratory bowl feeder for Engine Valves in Rolling Orientation

Prodaid Engineers, the 40 years old vibratory bowl feeder manufacturer from Bangalore recently completed an order for a SPM manufacturer for supplying a vibratory bowl feeder for feeding of Engine Valves. Usually, most manufacturers require the engine valves with the head up on a rail. However, in this case, the requirement was to get the same in rolling orientation where the head was away from the bowl centre. Hence, Prodaid used its Model PA-55 for this purpose. The engine valves were first oriented with head up and then twisted in the bowl itself to make them come out of the bowl in rolling orientation. A speed of 30 parts per minute was provided as against the required speed of 12 parts per minute.